Asko WM70 Manuel de service télécharger pdf (Page 28)

Service manual WM70

Shop program WM70.3

1. Activating the Shop program (for machines manufactured up to week 736)

If the machine is on: First turn off the power at the main power switch.

Then press and hold the Start button while turning on the main power switch.

At this point no settings can be made. The centre display will activate after 3

minutes. Settings can now be made, but the machine cannot be started.

2. Stopping the Shop program (for machines manufactured up to week 736)

First turn off the power at the main power switch.

Then press and hold the Start button while turning on the main power switch.

The Shop program is now stopped.

1. Activating the Shop program (for machines manufactured from week 737 on)

If the machine is on: First turn off the power at the main power switch.

Then press and hold the Start button while turning on the main power switch.

Press the program selector 5 times At this point no settings can be made. The

centre display will activate after 3 minutes. Settings can now be made, but the

machine cannot be started.

2. Stopping the Shop program (for machines manufactured from week 737 on)

First turn off the power at the main power switch.

Then press and hold the Start button while turning on the main power switch.

Press the program selector 5 times.

The Shop program is now stopped.

Store program WM70.2 and WM70.1

There are no store programs on the WM70.2 and WM70.1.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Pas de commentaire

Asko WM70 Manuel de service Page 28