Asko DBI664IXXLS Instructions d'exploitation télécharger pdf (Page 18)

ActionPossible causesProblem

Clean the coarse and fine filters.The filters are blocked.Water remains in the dishwasher above the filters.

Check that the filter handle is locked in the stop

position. The handle should point straight out

from the dishwasher.

The filters are not fitted correctly.

Clean the drain pump. See the chapter Care and

maintenance instructions.

Debris in the drain pump.

Check that the hose is free from kinks and sharp

bends.

Kink in drain hose.

Loosen the drain hose from where it terminates.

Check that no debris has clogged the hose. Is

the cone-shaped part of the drain boot cut to the

maximum size of the fitting where it attaches?

Blocked drain hose.

Clean with dish brush and low foaming cleaner.Dirt around the seals and in corners.Bad odor in dishwasher.

Run a program with a higher temperature once

or twice a month. Or run a self-cleaning program.

See Self-cleaning in the chapter Using the

dishwasher.

Low temperature programs have been selected

for a prolonged period.

Cleaning the garbage disposer connected to the

dishwasher can eliminate odors. Follow the

disposer manufacturer's cleaning instructions.

The dishwasher is connected to a garbage

disposer.

Activate the Extra Dry option.Depending on the load, the program's drying

cycle may be insufficient.

The dishes are not dry enough.

Fully load the dishwasher.The dishwasher is not fully loaded.

Top up with rinse aid or increase the rinse aid

dosage level. See the chapter Settings.

Rinse aid needs topping up or dosage is set too

low.

Open the door a little once the program has

finished.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 24

Pas de commentaire

Asko DBI664IXXLS Instructions d'exploitation Page 18