Asko W6342 Instructions d'exploitation télécharger pdf (Page 14)

6

Select options and settings

By changing options and settings you

can adjust the washing program to suit

your own specific requirements.

The machine will remember which settings

and options you choose for each program

and uses these (with the exception of Delayed

Start) the next time you select the program in

question. Of course, you can change the

options if you want.

Temperature

Select temperature by pressing the

Temperature button until the red field lights

up beside the desired temperature.

You can select temperatures between 30 °C

and 95 °C or Cold. If you select Cold, the

washing temperature will be the same as that

of the water coming into the machine.

For Wool/Hand it is not possible to select a

temperature higher than 40 °C. See the table.

Spin speed/No spin/No draining

Select the spin speed by pressing the Spin

button until the red field next to the spin speed

you want lights up.

You can select speeds between 400 and

1400 rpm, No spin or No drain.

Spin at 800 rpm always signifies short spin.

A spin between 400 and 800 rpm is always a

short spin.

For certain programs, it is not possible to

select a speed in excess of 800 rpm (see

table).

No spin means that the program does not

include a spin cycle and ends by draining.

No drain means that the program does not

include a spin cycle and ends with the water

from the final rinse still in the machine. The

washing will remain in the water from the final

rinse and therefore will not become creased.

In order to remove the washing from the

machine, select either a Spin or Drain

program or press the Door opening button

(key symbol) to drain the water from the

machine.

Super Rinse

Selecting Super Rinse gives you 2 extra

rinses. This option cannot be selected with

Wool/Hand, the Rinse program, Spin or Drain.

The machine will remember this setting and

use it the next time you select the program in

question. To deactivate Super Rinse, press

the Start/Stop button for 3 seconds. The red

field will go out.

A lit red field around the button indicates that

the option has been activated.

High water level

High water level can be selected in all

programs except the Hand/Wool, Spin and

Drain. High water level means additional

water during the main wash and rinse cycles.

A lit red field indicates that the option has

been activated.

14

Washing

Downloaded From WashingMachine-Manual.com Manuals

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Commentaires sur ces manuels

Pas de commentaire